MCS260B
CORNERSTONE 260B MONOCHROMATORS
55
Command:
IDLE?
Purpose:
See if any operations are pending. See the section entitled
“Command
Synchronization”.
Example:
IDLE?
E.g. response
1
: no operations are pending.
E.g. response
0
: an operation is pending.
Command:
INFO?
Purpose:
Query for basic instrument information. The response is:
“
Oriel Instruments, Model 74000 Cornerstone 260,SNXXX,V.VV
”
where XXX is the unit's serial number and V.VV is the version number
for the internal firmware. This command is included for reverse
compatibility
: the “*IDN?” query is preferred.
Note:
This query enables Echo mode until the next power cycle.
This information is also displayed on the Hand Controller for 2 seconds
when the unit is powered up.
