Newport CONEX-PSD, Руководство пользователя

Страница: 21 / 25

CONEX-PSD Two-Axis Position & Power Sensing Device
OF — Set/Get offset on ADC inputs 1 to 4
Usage Ready Config.
 
Syntax xxOFnn,nn,nn,nn or xxOF?
Parameters
Description xx [int] — Controller address.
Range xx
—
1
to
31
nn
[float] —
> -1
and
< 1
Units xx — None
nn — None
Defaults xx Missing: Error B.
Out of range: Error B.
Floating point: Error A.
Description This command is only available with the Ge sensor. In CONFIGURATION state, this
command will set the offset for the ADC input 1 to 4.
Errors A — Unknown message code or floating point controller address.
B — Controller address not correct.
D — Controller address not correct.
Rel. Commands ZT — Get all parameters.
Example
1OF0.01221,0.01221,-0.02442,-0.01221 | Sets the ADC input offset of controller #1.
13 EDH0315En1030 — 07/16