© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
32
APPLIANCES
Exterior Portable Freezers
Description
Explanation
1
ON / OFF
Switches the cooler on or off when the button is
pressed for between one and two seconds.
2
POWER
•
Status Indication:
•
LED lights up green: Compressor is on
•
LED lights up orange: Compressor is off
•
LED flashes orange: Display switched off
automatically due to low battery voltage
3
ERROR
Status Indication:
•
LED flashes red: Device is switched on but not
ready for operation
4
SET
Selects the input mode:
•
Temperature setting
•
Celsius or Fahrenheit display
•
Set battery monitor
•
Set brightness of display
•
Switch WiFi on or off
5
--
Display, Shows the information
6
DOWN -
Press once to decrease the value
7
UP +
Press once to increase the value
SELECTING THE TEMPERATURE UNITS
Temperature display units can be switched between Celsius
and Fahrenheit as follows:
1.
Switch on the cooler.
2.
Press the SET button twice.
3.
Use the UP+ or DOWN- buttons to select Celsius or
Fahrenheit.
The selected temperature units then appear in the display
for a few seconds. The display flashes several times before
it returns to the current temperature.
Operating Panel
Operation
Before starting your new cooler for the first time, you
should clean it inside and outside with a damp cloth
for hygienic reasons.
NOTICE
!
USING THE COOLER
1.
Place the cooler on a firm foundation. Make sure that
the ventilation slots are not covered and that the
heated air can dissipate.
2.
Connect the cooler.
3.
Press the “ON/OFF” button for between one and two
seconds.
4.
The LED “POWER” button lights up.
5.
The display switches on and shows the current
temperature.
6.
The cooler starts cooling the interior.
Danger of Overheating! Ensure at all times that
there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure
that the ventilation slots are not covered. Make sure
that the device is sufficiently far away from walls and
other objects so that the air can circulate.
DANGER
!
Dometic Exterior Portable Freezer Operation
(Models: CFX40W, CFX50W)
This article provides basic operation instructions for a Dometic Exterior Portable Freezer (Models: CFX40W, CFX50W).
SETTING THE TEMPERATURE
LATCHING THE COOLER LID
1.
Press the “SET” button once.
2.
Use the “UP +” and “DOWN -” buttons to select the
cooling temperature.
3.
The cooling temperature appears in the display for a
few seconds. The display flashes several times and
then the current temperature is displayed again.
1.
Close the lid.
2.
Press the latch down, until it latches in place audibly.
When operating with the battery, the display switches
off automatically if the battery voltage is low. The LED
“POWER” button flashes orange.
NOTICE
!
If the lid is left open for three minutes or more and
the device is switched on, the interior light will flash
until the lid is closed.
NOTICE
!
Содержание LONDONAIRE 2022
Страница 1: ...SM 2022...
