NewMar LONDONAIRE 2022, Руководство пользователя

Страница: 199 / 216

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
194
SLIDEOUTS
The lift bolt assembly may be mounted vertically or
horizontally but will function the same way. Horizontally-
mounted lift bolts may not have a cover, depending on
the location within the coach.
4. Use a 13/16 wrench or socket to rotate the lift bolt(s)
clockwise until they are seated in the receiver
block. Continue to turn the bolt(s) until the room is
completely lifted. When there are multiple lift bolts,
alternate evenly between all lift bolts, turning each
bolt two or three complete turns each time. Turning
one lift bolt without alternating may cause the room
to bind.
5. Leave the valves opened and refer to the “Manual
Retract” article for room retract procedures.
Do not use an impact wrench to turn lift bolts.
IMPORTANT
!
If at any stage something is not understood, or if the
room begins to bind, do not force the room. Contact
Newmar Customer Support for assistance.
IMPORTANT
!
Do not retract lift bolt until you read the ‘Extending
Room After Service’ section of the ‘Manual Retract’
article.
IMPORTANT
!
There may be more than one platform lift cylinder
assembly. There is a manual lift bolt for each
assembly. All lift bolts must be used to lift the room.
NOTICE
!
Source: HWH Computer-Controlled 725 Series Leveling System Operator’s Manual
How to Manually Retract a Hydraulic Slideout
This article provides instructions for manually retracting an HWH hydraulic slideout.
1. Start both threaded rods until resistance is met one
for the front and one for the rear mechanism should
be provided.
Dutch Star Access Point Mountain Aire Access Point King Aire Access Point
2. Using the wrench provided, a personal wrench,
or a tire iron with a 1-1/8” opening, rotate either
mechanism’s threaded rod clockwise six complete
turns.
Do not use an impact wrench to turn lift bolts.
IMPORTANT
!
CAUTION
!
Contact Newmar Customer Service (1-800-731-8300)
prior to manually lifting or retracting your Hydraulic
Flat Floor Slideout.
These brief operation instructions are for quick
reference only and should not take the place of
the complete manual(s) provided by this product’s
manufacturer. Refer to the corresponding links and
files in Newgle for more details about your product.
IMPORTANT
!
Manual room lift procedures must be done before
manual room retraction procedures on a HWH
Flat Floor/Level-Out Room Extension. Manual
lift procedures are not necessary for other HWH
slideouts that do not drop down when extended.
NOTICE
!
Some Newmar coaches may require removal of the
interior vertical fascia, but current coaches are built
with removable magnetic pieces or a sliding insert
for easy access to the hole and plates. Coaches with
lower cabinets secured to the fascia may have a
removable access plug. In some cases, this access
point may not align with the HWH threaded plate. In
these instances, removal of the lower cabinet may be
necessary to gain access to the plate.
NOTICE
!
To access the threaded plates, refer to the vehicle
manufacturer‘s instructions below.
NOTICE
!