NewMar LONDONAIRE 2022, Руководство пользователя

Страница: 121 / 216

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
116
ENTERTAINMENT SYSTEMS
Maintenance
The RoadTrip® P4 antenna is designed to be
maintenance free. However, it is a good idea to clean
the dome from time to time with a soft cloth, water, and
dish soap.
Source(s): Winegard RoadTrip P4 Automatic Stationary Roof-Mounted
Satellite TV Antenna
Product(s): Winegard RoadTrip Automatic Stationary Roof-Mounted
Satellite TV Antenna (Model: RTS-20B, Newmar Part Number: 135607)
DirecTV®
The RoadTrip® P4 antenna switch settings are preset for
DIRECTV. If you have a DISH or Bell TV receiver, you must
change the numbered switches found on the electronics
box under the dome.
Winegard Trav’ler Automatic Multi-Satellite TV Antenna
Operation (Models: SK-773, SKM-100, SWM-300)
This article provides basic operation instructions for a Winegard Trav’ler Automatic Multi-Satellite TV Antenna (Models:
SK-773, SKM-100, SWM-300).
Operation
The TRAV’LER antenna offers a simple one-button
operation. Simply press “POWER,” and the antenna
will automatically begin searching for satellites. The
instructions assume that the antenna is already in the
stowed position.
2. Verify that you are getting the receiver’s menu
screens on the television. These screens are
available with or without the dish finding the signal.
3. Ensure receiver is properly configured for your
provider.
4. Turn the power switch on for the antenna. Within
10–15 seconds, the dish will begin moving and
should make one or two revolutions during startup.
During this process, it is normal to hear a slight
grinding sound as the unit checks its rotational limits.
This does not harm the unit. The system will pause
to acquire GPS.
5. Once the dish begins its search, it pauses on signals
long enough to determine which satellite it has
found. The antenna may move off the signal in an
effort to verify the signal and should return shortly.
•
TIP: Because the P4 antenna uses information from
the last location where it was on signal, satellite
acquisition may take longer if the dish is inactive
over long distance traveling.
•
NOTE There are certain areas within the U.S. where
the P4 antenna may experience limited or no
coverage of the 129° satellite for HD programming.
DISH home coverage has the same limitations.
Problem areas include Washington, Oregon and
California, but limited coverage may extend past
these areas. Contact DISH for additional coverage
questions (1-888-825-2557).
•
ALSO when the P4 dome is blocked (example:
while going through a tunnel, under a bridge, by a
building, etc.) programming will not be available.
Once the block is removed, the programming will
return.
RECEIVER SETUP
Connect the receiver to a power source, and complete
receiver setup. Check out online receiver setup guides for
your antenna at www.winegard.com/support.
RECEIVER RECOMMENDATIONS
The RoadTrip® P4 antenna will operate with most
DIRECTV receivers. Winegard does not recommend
using receivers with hard drives, as they are not intended
for mobile applications. Winegard does not recommend
using an HD receiver since HD programming will not be
available. SWM only receivers require a SWM-840 kit.
SATELLITE COVERAGE
The antenna will locate and toggle between satellites 101°
and 119°. The RoadTrip® P4 antenna will not operate in all
areas where satellites 101° and 119° are available. The P4
antenna is not compatible with 110° or KA-band satellites
99° and 103°. Satellite coverage maps are based on level,
stationary operation. Reception interruption may also
occur during adverse weather conditions.