NewMar Bay Star 2022, Руководство пользователя

Страница: 168 / 196

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
165
PLUMBING
When using your stool, it is wise to fill the bowl 3/4 full of
water. This will help to wash the solids away from directly
below the stool and to ensure complete dumping of the
holding tank. After flushing, a small amount of water
should remain in the bowl.
Before adding water, consult the toilet manufacturer’s
owner’s manual for the specific procedure relating to
your system.
IMPORTANT
!
To prevent holding tank odors from entering the living
space, make sure a small amount of water remains in
the toilet bowl.
NOTICE
!
WARNING
!
Do not flush diaper wipes, feminine hygiene
products, or any other products that would not
be easily liquefied. Also avoid using holding tank
deodorant capsules, as they may cause damage to
the macerator. Damage resulting from flushing any
materials or objects other than organic waste and
toilet paper are not warrantable repairs.
Residual water trickle in ceramic bowls: Due to
integrated rim of this toilet bowl, water may continue
to slowly trickle into toilet bowl for up to 20 minutes
after flushing. If water trickle continues after 30
minutes, replace the water valve.
NOTICE
!
Dometic Standard Gravity-Discharge Toilets with Flush
Pedal Operation (Models: 300, 310, and 320 Series)
This article provides basic operation instructions for a Dometic Standard Gravity-Discharge Toilet with Flush Pedal (Models:
300, 310, and 320 Series). Dometic 300, 310, and 320 series toilets are lightweight, residential-size toilets for installation
directly above a holding tank.
Adding Water To The Toilet Bowl
To add water to the toilet, press the flush pedal part of the
way down. Water flows into the bowl while the flush ball
remains closed. If the flush ball moves, let up on the pedal
slightly. Adding water to an empty bowl helps prevent holding
tank odors from entering the living space. Adding water is
recommended prior to flushing solids and toilet paper.
Flushing The Toilet
To flush, press the pedal down until it contacts the floor.
Release the pedal after the complete flush.
•
When flushing liquids, press the pedal for 1-2
seconds.
•
When flushing solids, press the pedal until contents
are rinsed from bowl. Flushing longer than necessary
will cause holding tank to fill too quickly.
A small amount of water will collect in the bowl after a
flush to create an airtight seal.
Source(s): Dometic 310 and 320 Series Gravity-Flush Toilet Instruction Manual
Product(s): This source is associated with more than one product. Refer to Newgle
for more information about the product(s) offered for your coach’s model year.
Dometic Standard Gravity-Discharge Toilets with Flush
Handle or Wall Switch Operation (Models: 4300 and
4400 Series)
This article provides basic operation instructions for a Dometic Standard Gravity-Discharge Toilet with Flush Handle or Wall
Switch (Models: 4300 and 4400 Series).
Dometic 4300 and 4400 series electric gravity-discharge toilets flush waste in to a holding tank or other effluent storage/
disposal system. Operated by a wall-mounted flush switch or electronic flush handle, the toilet allows the user to add water
to the bowl (before using or flushing) and to flush the toilet by pushing a button.
Adding Water To The Toilet
Bowl
Raise the flush handle or press “Add Water” switch until
desired water level is achieved. More water should be
added when flushing solids.
CAUTION
!
Do not add too much water to the bowl, or the toilet
may overflow.