NewMar Bay Star 2022, Руководство пользователя

Страница: 135 / 196

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
132
HVAC
7. Allow 30 seconds for main burner to light after blower
comes on. This furnace Is equipped with an ignition
device which automatically lights the burner. Do not
try to light the burner by hand.
8. If burner does not light, repeat Steps 1 through 7.
9. If after three (3) attempts with no ignition, go to shut
down and contact your dealer or a local recreational
vehicle service agency. Do not continue to cycle
furnace through thermostat in an attempt to get
ignition.
•
Note: If furnace should lock out, the blower will go
off in 5 minutes and remain off until unit is reset by
reactivating thermostat.
Maintaining and Cleaning
You, as the owner/user, should inspect the furnace
monthly during the heating season for presence of soot
on vent. Operating the furnace under this condition could
lead to serious property damage, personal injury or loss
of life. If soot is observed on the vent, immediately shut
furnace down and contact a qualified service agency.
[There are] several safety related items that you should
follow during the heating season to assure continued
safe operation of the furnace. [For a complete list of these
items, refer to your product’s user manual in Newgle.]
Source(s): Suburban User’s Information Manual for SF, SFV, SH, and
SHD Models
Product(s): This source is associated with more than one product. Refer
to Newgle for more information about the product(s) offered for your
coach’s model year.
Keep your coach comfortable no matter where you are. Whether it’s cold or hot outside, on the inside, you
will always be “just right” using your coach’s thermostat.
Thermostats
Your CCC 2 thermostat is equipped with a liquid crystal
display (LCD) that identifies the mode of operation,
temperature set-point, zone identification, fan speed,
program “1” and “2”, inside temperature, clock, °F / °C,
compressor delay, and filter maintenance. The modes of
operation viewed in the LCD will vary depending on the
system installed in your RV.
To help familiarize yourself with the operation of the
CCC 2 thermostat, review the following diagrams
and accompanying text that explain the functional
characteristics of this system.
Dometic Comfort Control Center II Thermostat
Operation (Model: CCC II / CCC 2)
This article provides an operational overview of the Dometic Comfort Control Thermostat (Model: CCC II / CCC 2).
Control Buttons and LCD Icons
ON/OFF (POWER)
To turn ON the CCC 2 thermostat when the back light
is OFF, first press any button to wake up the CCC 2
thermostat. Then press and release the ON/OFF button.
The LCD will display the last programmed settings. To
turn OFF the CCC 2 thermostat press the ON/OFF button
and release. Only the time of day will display when the
CCC 2 thermostat is in the OFF condition.