Newman PANTHER 5 SE Скачать руководство пользователя страница 17

Страница: 17 / 57

3.4 The chimney

Refer to current National laws, Building Regulations, and any Rules in Force, including British standard

BS EN 15287-1:2007 and BS 8303 and (Approved Document J England & Wales)

The construction of the masonry chimneys, flue block chimneys and connecting flue pipe system

must meet the requirements of the

Current National laws, Building Regulations, and any Rules in

Force.

This stove must

never

be connected to any shared chimney.

An efficient modern stove places heavy demands on the chimney, and you should have the chimney

regularly swept and inspected at least twice a year for smokeless fuel use and quarterly for wood

fuel use by an approved chimney sweep.

The flue or chimney system

must be

in good condition. It must be inspected and swept by a

competent registered person and passed for use with the appliance before installation. The National

Association of Chimney sweeps (NACS) and for Northern Ireland (NIACS) Northern Ireland

Association of Chimney Sweeps offer a register of approved chimney sweeping and inspection

services who will issue certificates after inspection and sweeping.

Where the chimney is believed to have previously served an open fire installation it is possible that

the higher flue gas temperatures from a closed appliance may loosen deposits that were previously

firmly adhered, with the consequent risk of flue blockage. It is therefore recommended that the

chimney be swept a second time within a month of regular use after installation by an approved &

competent chimney sweep.

If it is necessary to fit a register plate it

must

conform to the

Current National laws, Building

Regulations, and any Rules in Force.

The minimum height of the flue or chimney must be 4.5m from the hearth to the top of the flue,

with no horizontal sections and a maximum of 4 bends. Bends must have angles of less than 45

degrees from the vertical. There should be at least 600mm of vertical flue pipe above the appliance

before any bends are introduced. Ensure the connecting flue pipe is kept a suitable distance from

any combustible material and does not form part of the supporting structure of the building.

The installer

must ensure

the flue pipe diameter is not less than the diameter of the outlet of the

appliance and does not narrow to less than the size of the outlet at any point in the system.

Make provision to remove the appliance without the need to dismantle the chimney.

Any existing flue

must be

confirmed as suitable for the new intended use as defined in the Current

Building Regulations.

The flue or chimney systems

must be

inspected and swept by an approved chimney sweep to

confirm the system is structurally sound and free from obstructions.

The flue exit from the building

must comply

with

Current National laws, local building control rules,

Building regulations and any Rules in Force.

Chimney heights and / or separations may need to be increased in particular cases where wind

exposure, surrounding tall buildings, high trees or high ground could have adverse effects on flue

draught

It is

highly recommended

that an approved and certified flexible flue liner that complies with

Current

National laws, Building Regulations and any Rules in Force

of the correct internal diameter be used

to line the chimney, the liner

must be

approved for use with Multi Fuel burning. Flue liner

installation

must comply

with

Current National laws, Building Regulations, and any Rules in force,

also refer to the flue liner manufacturer’s instructions. The flue liner

must be

replaced when an

appliance is replaced, unless proven to be recently installed and in good condition.

The cross-sectional area of the chimney (at its narrowest point)

must comply

with

Current National

and Local Building Regulations and any rules in force.

Generally, the area needed for a wood-burning

stove installation should measure at least 150 mm internal diameter. Please refer to

Current

National laws, Building Regulations, and any Rules in Force.

Important note

: The Panther 5 SE has been tested for smoke exemption so a minimum internal flue

Содержание PANTHER 5 SE


























































Результаты поиска

Содержание PANTHER 5 SE

Отзывы:

Похожие инструкции для PANTHER 5 SE

Бренды по названию

Популярные бренды

Newman PANTHER 5 SE, Инструкция по установке и эксплуатации

Результаты поиска

Содержание PANTHER 5 SE

Отзывы:

Похожие инструкции для PANTHER 5 SE

Бренды по названию

Популярные бренды