Newman PANTHER 5 SE, Инструкция по установке и эксплуатации

Страница: 35 / 57

35
The stove may emit an irritating gas when used for the first time, and it may smell a little. The room
should be thoroughly ventilated. Let the fire burn with a high draught (without over firing) until all
traces of the gas have disappeared and no smoke or smells can be detected. Evacuate all people
from the room until all odours have cleared. If for any reason the odours do not clear, do not add
more fuel and allow the fire to extinguish, seek professional assistance.
Panther 5 SE Air Controls
(see Figure 4)
Always use the long ash pan / operating tool and stove mitten to operate the air controls.
For wood burning the amount of heat emitted by the stove is regulated by using the secondary air
control.
The exact positioning of the air controls to achieve optimum burn for the Panther 5 SE will depend
on many factors such as weather conditions, chimney size and local topography. However, to give
some guidance please read section 4.3.1 and section 4.3.2.
Panther 5 SE controls
(see Figure 4)
A stove mitten and long ash pan / operating tool are supplied with this stove for your use when
operating the stove, if the mitten supplied is of the incorrect size for the user, then it is
recommended that the user sources a CE approved stove mitten or glove to the correct size before
lighting and operating this stove.