Newland NLS-HR3290 Скачать руководство пользователя страница 2

Страница: 2 / 191

Disclaimer

Please read through the manual carefully before using the product and operate it according to the manual. It is

advised that you should keep this manual for future reference.

Do not disassemble the device or remove the seal label from the device, doing so will void the product

warranty provided by Fujian Newland Auto-ID Tech. Co., Ltd.

All pictures in this manual are for reference only and actual product may differ. Regarding to the product

modification and update, Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any

software or hardware to improve reliability, function, or design at any time without notice. The information

contained herein is subject to change without prior notice.

The products depicted in this manual may include software copyrighted by Fujian Newland Auto-ID Tech. Co.,

Ltd or third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify,

decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without prior

written consent from the copyright holders.

This manual is copyrighted. No part of this publication may be reproduced, distributed or used in any form

without written permission from Newland.

Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above.

Fujian Newland Auto-ID Tech. Co., Ltd.

3F, Building A, No.1, Rujiang West Rd., Mawei, Fuzhou, Fujian, China 350015

http://www.newlandaidc.com

Содержание NLS-HR3290
































































































































































































Результаты поиска

Содержание NLS-HR3290

Отзывы:

Похожие инструкции для NLS-HR3290

Бренды по названию

Популярные бренды

Newland NLS-HR3290, Руководство пользователя

Результаты поиска

Содержание NLS-HR3290

Отзывы:

Похожие инструкции для NLS-HR3290

Бренды по названию

Популярные бренды