Newland NLS-HR3290, Руководство пользователя

Страница: 135 / 191

Enter
Setup
123 * * Exit Setup
Step 8: Enter formatter command
Refer to the
“Formatter Command Type 6” section in this chapter. Scan the alphanumeric barcodes that
represent the command you need to edit data. For example, when a command is F141, you should scan
F141. A command can contain up to 112 characters.
Step 9: Scan the Save barcode from Appendix 7: Save/Cancel Barcodes to save your data format.
Example: Program format_0 using formatter command type 6, Code 128 containing 10 characters
applicable, send all characters followed by
“A”.
1. Scan the Enter Setup barcode Enter the Setup mode
2. Scan the Add Data Format barcode Add a data format
3. Scan the 0 barcode Select format_0
4. Scan the 6 barcode Select formatter command type 6
5. Scan the 9 barcode three times All interface types applicable
6. Scan the barcodes 002 Only Code 128 applicable
7. Scan the barcodes 0010 Only a length of 10 characters applicable
8. Scan the alphanumeric barcodes F141 Send all characters followed by
“A” (hex: 41)
9. Scan the Save barcode Save the data format