Newland NLS-HR200C Скачать руководство пользователя страница 2

Страница: 2 / 156

Disclaimer

Please read through the manual carefully before using the product and operate it according to the manual. It

is advised that you should keep this manual for future reference.

Do not disassemble the device or remove the seal label from the device. Otherwise, Fujian Newland Auto-ID

Tech. Co., Ltd. does not assume responsibility for the warranty or replacement.

All pictures in this manual are for reference only and actual product may differ. Regarding to the product

modification and update, Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any

software or product to improve reliability, function, or design at any time without notice. Besides, the

information contained herein is subject to change without prior notice.

The products depicted in this manual may include software copyrighted by Fujian Newland Auto-ID Tech. Co.,

Ltd or a third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute,

modify, decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without

prior written consent from the copyright holders.

This manual is copyrighted. No part of this publication may be reproduced or used in any form without written

permission from Newland.

Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above.

Fujian Newland Auto-ID Tech. Co., Ltd.

3F, Building A, No.1, Rujiang Xi Rd., Mawei, Fuzhou, Fujian, P.R. China. 350015.

http://www.nlscan.com

Содержание NLS-HR200C





























































































































































Результаты поиска

Содержание NLS-HR200C

Отзывы:

Похожие инструкции для NLS-HR200C

Бренды по названию

Популярные бренды

Newland NLS-HR200C, Руководство пользователя

Результаты поиска

Содержание NLS-HR200C

Отзывы:

Похожие инструкции для NLS-HR200C

Бренды по названию

Популярные бренды