Newland NLS-HR200C, Руководство пользователя

Страница: 133 / 156

【
Enter Setup
】
133 **
【
Exit Setup
】
Custom Suffix
Enable/Disable Custom Suffix
If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed
10 characters. For example, if the custom suffix is “AB” and the barcode data is “123”, the Host will
receive “123AB”.
**
【
Disable Custom Suffix
】
【
Enable Custom Suffix
】
Set Custom Suffix
To set a custom suffix, scan the Set Custom Suffix barcode and then the numeric barcodes
corresponding to the hexadecimal value of a desired suffix. To save the settings, scan the Save barcode.
Note: A custom suffix cannot exceed 10 characters.
【
Set Custom Suffix
】
Set the custom suffix to “CODE” (its hexadecimal value is 0x43/0x4F/0x44/0x45):
1. Scan the Enter Setup barcode.
2. Scan the Set Custom Suffix barcode.
3. Scan the numeric barcodes “4”,“3”,“4”,“F”,“4”,“4”,“4” and “5”. (See the “ Digit
Barcodes ” section in Appendix )
4. Scan the Save barcode. (See the “ Save/Cancel Barcodes ” section in Appendix )
5. Scan the Enable Custom Suffix barcode.
6. Scan the Exit Setup barcode.