Newland NLS-HR200C, Руководство пользователя, Страница: 135 / 156

【
Enter Setup
】
135 **
【
Exit Setup
】
To set a terminating character suffix, scan the Set Terminating Character Suffix barcode and the
numeric barcodes representing the hexadecimal value of a desired terminating character and then scan
the Save barcode. Refer to Appendix 4: ASCII Table for hexadecimal values of terminating characters.
Note: A terminating character suffix cannot exceed 2 characters.
【
Set Terminating Character Suffix
】
Set the terminating character suffix to 0x0A:
1. Scan the Enter Setup barcode.
2. Scan the Set Terminating Character Suffix barcode.
3. Scan the numeric barcodes “0” and “A”. (See the “ Digit Barcodes ” section in
Appendix )
4. Scan the Save barcode. (See the “ Save/Cancel Barcodes ” section in
Appendix )
5. Scan the Exit Setup barcode.