Newland NLS-HR200C, Руководство пользователя

Страница: 36 / 156

【
Enter Setup
】
**
【
Exit Setup
】
36
Image Stabilization Timeout
The scanner waits for the image stabilization timeout to occur before activating a decode session every
time it detects a change in ambient illumination. The image stabilization timeout is programmable in 1ms
increments from 0ms to 1,600ms. The default setting is 500ms.
Set the Image Stabilization Timeout to 1,500ms:
1. Scan the Enter Setup barcode.
2. Scan the Image Stabilization Timeout barcode.
3. Scan the numeric barcodes “1”, “5”, “0” and “0”. (See the “ Digit Barcodes ”
section in Appendix )
4. Scan the Save barcode. (See the “ Save/Cancel Barcodes ” section in Appendix )
5. Scan the Exit Setup barcode.
Continue after Good Read
Continue after Good Read: The scanner starts next decode session after good read.
Pause after Good Read: The scanner starts another round of illumination monitoring and image
stabilization after good read.
**
【
Pause after Good Read
】 【
Continue after Good Read
】
【
Image Stabilization Timeout
】