Newland NLS-HR15XX-30, Руководство пользователя

Страница: 68 / 104

【
Start Setup
】
58 【
Exit Setup
】
2.
Read the “CodeID Setup” barcode.
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
Check Setup
COOP25 barcode data does not compulsively include the check digit, if check digit exists, then it is the last character.
Check digit is calculated according to all the datas, for checking if the data is correct or not.
 Set “No Check”, the scanner will transmit all the barcode data.
 Set “Check but do not Send Check digit”, the scanner will check according to the last bit, if successful, all the data
except for the check digit will be transmitted, if failed, then the scanner will indicate “barcode reading failed”
 Set “Check and Send Check digit” the scanner will check according to the last bit, if successful, all the data including
the check digit will be transmitted, the check digit will be treated as the last bit of the normal data; if failed, then the
scanner will indicate “barcode reading failed”
No Check
Check and Send Check Digit
Check but do not Send Check Digit
Note: by setting “do not send the check digit”, if the data length except for the 1 character check digit is less than the
minimum barcode reading limit, the barcode reading will be failed. (For example: the scanner set the the minimum barcode
reading length of COOP25(JapaneseMatrix2 of
5) to 4 characters and “do not send check digit”, in such circumstances,the
scanner is not able to read the Deutsch12 with 4 characters. )
Set the Barcode Reading Length
The scanner is only able to read the COOP25 with tramsmission content length falls in the limited range, the range is
consisted of the maximum value and minimum value in units of character (the maximum value and minimum value also
included), the COOP25 exceeds the range can not be read or transmitted.

Read th
e barcode of “Set the Minimum Length Limit” to adjust the minimum length limit.
 Read the barcode of “Set the Maximum Length Limit” to adjust the maximum length limit.