Newland NLS-HR15XX-30, Руководство пользователя, Страница: 83 / 104

【
Start Setup
】
【
Exit Setup
】 73
CodeID Setup
To activate the set
up function by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
Code ID Setup
Example: Set the CodeID ofCode 11
to “p” (the hexadcimal value is 0x70).
1.
Read the “Start Setup” barcode.
2.
Read the “CodeID Setup” barcode.
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
Check Setup
Code 11 barcode data does not compulsively include the check digit, if check digit exists, then it is the last character.
Check digit is calculated according to all the datas, for checking if the data is correct or not.
Set “No Check”, the scanner will transmit all the barcode data.
No Check
One Digit Check, MOD11
Two Digits Check, MOD11/MOD11 Two Digits Check, MOD11/MOD9
MOD11 Single Check
（
Len<=10
）
MOD11/MOD11 Double Check
（
Len>10
）
MOD11 Single Check
（
Len<=10
）
MOD11/MOD9 Double Check
（
Len>10
）