Newland NLS-HR15XX-30 Скачать руководство пользователя страница 2

Страница: 2 / 104

Please carefully read the manual before use the product, andeffectively to protect the safety of products operation. Please keep

this manual after reading properly and save for the next reading.

Do not disassemble the device or tearing the seal label on the device. Otherwise, FuJian Newland Auto-ID Tech. Co., Ltd. does

not assume responsibility for the warranty or replacement.

The pictures in this manual are for reference only. If the individual picture from the actual product was different with this manual,

please refer to actual product. Regarding to the product modification and update, FuJianNewland Auto-ID Tech. Co., Ltd.

reserves the right to make changes to any software or product to improve reliability, function, or design at any time without notice.

This manual contains all the information is protected by copyright. Any Company and individuals should not in any way or reason

for any form of extract, copy, sell all or part of this document without written permission.

FuJianNewland Auto-ID Tech. Co., Ltd.

3F, Building A, No.1, Rujiang Xi Rd., Mawei, Fuzhou, Fujian, P.R. China. 350015.

Web :

http://www.nlscan.com

Revision History

Changes to the original manual are listed below:

Revrsion

Description

Change Date

Ver 1.0

Initial Version

2011-12-25

Ver 1.1

Modify text mistakes

，

Adjust the format of Start/Exit Setup

2012-08-10

Содержание NLS-HR15XX-30









































































































Результаты поиска

Содержание NLS-HR15XX-30

Отзывы:

Бренды по названию

Популярные бренды

Newland NLS-HR15XX-30, Руководство пользователя

Результаты поиска

Содержание NLS-HR15XX-30

Отзывы:

Бренды по названию

Популярные бренды