Newland NLS-HR15XX-30 Скачать руководство пользователя страница 82

Страница: 82 / 104

【

Start Setup

】

【

Exit Setup

】

able to read the Code 93 with 4 characters. )

Set the Barcode Reading Length

The scanner is only able to read the Code 93 with tramsmission content length falls in the limited range, the range is

consisted of the maximum value and minimum value in units of character (the maximum value and minimum value also

included), the Code 93 exceeds the range can not be read or transmitted.



Read the barcode of “Set the Minimum Length Limit” to adjust the minimum length limit.



Read the barcode of “Set the Maximum Length Limit” to adjust the maximum length limit.



Set the Minimum Length Limit

Set the Maximum Length Limit

Note

：

the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the

minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;

if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length.

Code 11

Restore the Default Value

By reading the barcode, the parameter setup of Code 11 will be restored to the factory default state.

Restore the Default Setup Value of Code 11

Allow to Read Code 11 or not

Allow to Read Code 11

Prohibit Reading Code 11

Note: the scanner will become unable to read Code 11 by reading the setup barcode “Prohibit Reading Code 11”, thus, if

the scanner is unable to read the Code 11, please try to read the setuo barcode “allow to read Code 11”.

Содержание NLS-HR15XX-30









































































































Результаты поиска

Содержание NLS-HR15XX-30

Отзывы:

Newland NLS-HR15XX-30, Руководство пользователя, Страница: 82 / 104

Результаты поиска

Содержание NLS-HR15XX-30

Отзывы: