National Electronics & Watch Co,. Ltd.
BC04
HRM LINK setting:
Press S5 to start linking your HRM belt. The watch will display the old HRM ID and then start
searching for new HRM ID. If a new belt ID is found, it will display new the ID and then prompt
the user to use the new ID (YES or NO). If you select NO by pressing S1/S3, it will use the OLD
ID and go to
RUN
mode.
HRM ON or OFF setting:
1. Press S5 to enter HRM ON/ OFF setting.
2. Press S1/S3 to turn ON or OFF the HRM.
3. Press S5 to accept and exit.
Altimeter setting:
You can set the Current Altitude.
1. Press S5 to enter Altimeter setting.
2. Press S1/S3 to set your current Altitude.
3. Press S5 to accept value and exit.
BAROMETER setting:
You can set the current weather and barometric pressure here.
1. Press S5 to set the current weather.
2. Press S1/S3 to change values.
3. Press S5 to set the Sea level barometric pressure.
4. Press S1/S3 to change values.
5. Press S5 to set the UNIT for Temperature
6. Press S1/S3 to change deg C to deg F or vice versa.
7. Press S5 to accept the value and exit.
Setting the DISPLAY:
1. Press S5 to enter.
2. Press S1/S3 to turn ON or OFF the
2 line views
and /or the
4 line views
.
3. Press S5/S7 to confirm setting.
Contrast setting:
Contrast Range is 0 to 100%.
1. Press S5 to enter Contrast setting.
2. Press S1/S3 to change values. The range is 0 to 100%.
3. Press S5 to accept and exit.
Key tone setting:
You can set the key tone ON or OFF. If key tone is on, there is confirmation sound every time
you press a button.
1. Press S5 to enter Key tone setting.
2. Press S1/S3 to turn ON or OFF
3. Press S5 to accept and exit.
Alarm setting:
•
Select
ALARM
by pressing S5
•
Select
ALARM 1
to
ALARM 5
by pressing S1 or S3 and then press S5 to enter.
•
Set the
HOUR.
Press S1/S3 to change values. Press S5 to enter
•
Set the
MINUTE
. Press S1/S3 to change values. Press S5 to enter
•
Set the alarm time referred to
T1
or
T2
. Press S1/S3 to change values. Press S5 to enter
•
Set the alarm
ON
or
OFF
. Press S1/S3 to change values. Press S5 to enter
•
Press S7 to exit alarm setting
Night mode setting:
Press S5 to enter Night setting. Press S1/S3 to Select
PUSH ON
or
STAY OFF
.
PUSH ON
– Pressing any key will turn ON the EL for 10 seconds from 6:00 pm to 7:00 am
every day.
STAY ON
– EL back light will be continuous ON from 6 am to 7 pm if GPS is ON and
Chronograph is running.
Outside the time frame from 6 pm to 7 am, only press S5 can turn ON the El for 10 seconds.
Viewing PRODUCT ID:
Press S5 when PROD. ID is highlighted to View the current Software code of the watch. Press
S7 to exit.
EXIT :
Press S5 or S7 to exit to Time mode. Nothing to set here.
Battery:
Watch is using a rechargeable Lithium Ion battery that will require approximately 4 hours
charging time using the USB cable. While battery is charging, the watch cannot be used and all
buttons are disabled. User needs to recharge the battery when the watch indicates a low battery
level.
Battery Life: Approximately 8 hrs minimum in training mode.