Force X10e Bluetooth Fitness Smartwatch - User Manual
Important
: This Smartwatch is Not a Medical Device.
Requirements:
Android 5.0 & above | iOS 9.0 & above
Bluetooth 5.0
Caution:
1. Clean the Smartwatch regularly, especially its inner side, and keep it dry always.
2. Adjust the Smartwatch tightness to ensure air circulation.
3. Excessive skincare products should not be used on the wrist wearing the smartwatch.
4. Please cease wearing the smartwatch in case of skin allergy or any discomfort.
Power On the Watch:
Long press the crown-like button on the side of the smartwatch for 3 seconds or plug in the Magnetic
charging cable to charge the watch.
Downloading ‘Da Fit’ Mobile App:
1. For downloading the App go to Playstore or App Store and search 'Da Fit'. Now, download and install the
app.
OR
Type in Your Phone Browser
http://plus.crrepa.com/app-download/dafit
Now, download and install the app.
OR
Switch on the smartwatch, go to settings and then inside setting you will find QR code option, just click on it
you will get the QR code. Now, scan the QR code from your phone, you will get a link for downloading 'Da
Fit' app. Download and install the App in your smartphone.
Charging the Smartwatch:
1. Turn OFF the Smartwatch before Charging.
2. Simply, hold the 2-pin connector of the USB charging cable near the 2 small round magnetic charging
interfaces. The connector will get connected to the interface through the magnetic pull. It's a completely
sealed system free of exposed contacts. Plug the USB end of the cable into a DC5V/1A power source.
