New Rock Technologies WROC2000, Руководство пользователя

Страница: 49 / 71

49
Notes:

In blind transfer mode, if the line of the transferor is occupied, a busy tone will be heard by the
transferee, unless the call waiting feature is enabled for the transferor.

In blind transfer mode, the phone number of the transferee is displayed on the phone of the
transferor.

In consultation transfer mode, the phone number of the intermediate operator will be displayed
on the phone of the transferor.
Call Park
This feature allows you to put a call on hold with music played for the caller, and hang up the
phone, and then continue the conversation from any other extension.
Note: Call hold must be enabled before you enable call park.
Using Call Park
Call park
Dial **
->
press *30
->
dial parking line number (available from 1 to 9)
->
hang up.
Note:
If the line selected for parking is occupied, you are prompted to change to
other line number.
Parking retrieval Press #30
->
dial the parking line number.
Call Waiting
If a new call comes in when you are on a call, you will hear a new call indicator tone prompting you
to answer, or ignore the new call without terminating the current call. Additionally, you can switch
between the two calls.
Enabling Call Waiting
To enable call waiting, perform the following steps:
1. Click Voice on the home page.
2. Navigate to Extension>Analog extension>Advanced> Phone >Other.
3. (Optional) Navigate to Extension>IP extension> >Other .
4. Select Call waiting .
5. Click Save .
Using Call Waiting
Ignore the new call
No action is required when the system prompts you with a
new call indicator tone that will automatically disappear after
several minutes.
Answer the new call On hearing the new call indicator tone, press ** to place the
current call on hold and answer the new call.
Switch between the calls Press ** .
Note: The call waiting feature is not available for the attendant.