New Rock Technologies MX100-TG, Руководство пользователя

Страница: 60 / 75

Monitoring
MX100-TG User Manual
60
This field denotes the internal TDM time-slot being used by the
ISDN time-slot. The internal TDM time-slot is 8M, and is distributed
to four E1 interfaces (2M each). Each E1 has 32 time-slots, as a
result the internal TDM time-slot has a total of 128 (4 x 32)
timeslots.
DSP
The MX100-TG Control Module has up to eighteen DSP chips
which are identified from DSP0 to DSP18. The
DSP field indicates
which DSP chip is being used by the indicated time-slot of the
T1/E1.
Remote
This parameter reports the current remote IP address which could
be the address of the RTP Media Server or access gateway, which
comes before the RTP port number.
Local
The local parameter shows the locally used RTP port number.
Codec
The codec value reports the currently used codec.
Ref (Call Reference)
This parameter is the call reference which is used to recognize the
information involved with call or equipment book/cancel requests on
local user and network interfaces. The call reference doesn’t include
the end-to-end function of ISDN. In other words, this parameter is
valid only in current segment (user and network side) and in the
next segment the same call reference value can also be used.
State
This is the call state which denotes the current state of a call. See
the following table for detailed definitions for various call states.
Table 5: Call States