New Rock Technologies MX100-TG, Руководство пользователя

Страница: 35 / 75

Configuring the MX100-TG
MX100-TG User Manual
35
Figure 9. Routing Table
Routing Table Syntax
Routing Table statements use the following syntax:
Format:
Source Number Handle [Parameter]
or,
Format:
Source Number ROUTE Destination [Parameter]
Source
Source can be ISDN or IP . When source is IP , an address can
optionally be specified, e.g., [xxx.xxx.xxx.xxx] or
[xxx.xxx.xxx.xxx:port]
Number
The default number is called party number. If the calling party
number is being used, add
CPN in front of the number. The
Number can be:
y
A specific number like (114, 61202700)
y
A number prefix like (61., 61x5 or 61)
y
A number range like (268[0-1,3-9])
Handle
The Handle parameter can be:
y
KEEP digits from left or right
y
REMOVE digits from the left or right