New Rock Technologies MX100-TG, Руководство пользователя

Страница: 42 / 75

Configuring the MX100-TG
MX100-TG User Manual
42
Switch Side defines the ISDN behavior. The setting of Switch Side
for the other side of the T1/E1 line must be opposite that of the
MX100-TG. The settings for
Switch Side are User and Network .
Hunting
The Hunting parameter is used to set how the MX100-TG searches
an idle time-slot. Hunting can be set to Forward or Backward .
Echo Cancellation
Using the Echo Cancellation drop-down menu, echo cancellation
can be turned Enable or Disable for an individual ISDN line.
Setting the system parameter Echo Cancellation (see
“Echo Cancellation Length” on page 13) to
Disable will
turn off Echo Cancellation at the system level.
TDM Settings
The MX100-TG always has four T1/E1 interfaces. Capacity is
determined by the processing power purchased and supplied by the
main board. A specific T1/E1 interface is selected by choosing
TDM
Settings from the left menu pane on the main screen .
Do not connect T1/E1 lines in excess of the
system’s capacity. To determine the capacity of
the MX100-TG see the product label.
DS1 Type
DS1 Type configures if the T1/E1 interface operates as a T1 or E1
interface. Select the desired setting from the DS1 Type dropdown
box.
DS0 Type
The DS0 Type allows configuring the PCM encoding type. Allowed
settings are ULaw and ALaw .