New Holland Workmaster 25S, Руководство оператора

Страница: 132 / 208

6 - WORKING OPERATIONS
Top link adjustment
To adjust the top link (5) length
1. Loosen the jam nut (6) .
2. Hold the link end (7) and rotate the center section of
the link to lengthen or shorten the top link.
76114203
2
Stabilizer check links adjustment
Adjust the length of the stabilizer check links (1) after the
implement is mounted to the tractor. Push implement side
to side check for lateral movement and possible interfer-
ence with rear tires.
To adjust length of stabilizer
1. Remove hairpin cotter pin (2) and rotate the turnbuckle
(3) as needed.
2. Shorten the length of the stabilizer to reduce lateral
movement or lengthen the stabilizer to increase the
lateral movement.
76114205
3
NOTICE: Check for any interference when the three point hitch is cycled. If the three point hitch interferes with any-
thing, adjust stabilizers as needed.
NOTICE: Shorten the length of the stabilizers as much as possible to limit side-to-side movement of hitch arms and
implement. Excessive side-to-side movement of hitch could damage stabilizers.
6-12