New Holland Workmaster 25 Tier 4B, Руководство оператора

Страница: 38 / 198

2 - SAFETY INFORMATION
Instructional signs
The following instructional signs are placed on your machine as a guide for your safety and for those working with
you. Walk around the machine and note the content and location of these instructional signs before operating your
machine.
Keep instructional signs clean and legible. Clean instructional signs with a soft cloth, water, and a gentle detergent.
Do not use solvent, gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may damage
or remove safety signs.
Replace all instructional signs that are damaged, missing, painted over, or illegible. If an instructional sign is on a
part that is replaced, make sure the instructional sign is installed on the new part. See your dealer for replacement
instructional signs.
Instructional signs that display the “Read Operator’s Manual” symbol are intended
to direct the operator to the operator’s manual for further information regarding
maintenance, adjustments, or procedures for particular areas of the machine.
When an instructional sign displays this symbol, refer to the appropriate page of
the operator’s manual.
Instructional sign locations
NHIL12CT00863FA
1
2-20