New Holland T4.105F, Руководство оператора

Страница: 75 / 248

3 - CONTROLS/INSTRUMENTS
TRANSMISSION
Transmission - Operating 4WD models
By adopting different bevel gear pairs, all of the listed mechanical transmissions can develop a speed of 40 km/h
( 24.85 mph ).
Models with standard front axle:
FRONT REAR
11/28 11/36
With 20 " rear tires the bevel gear pair for all models is as follows:
FRONT
REAR
10/29 11/32
As a consequence of the use of the high pinion set, the synchronised power take−off has a different ratio between
the wheel speed and the take-off shaft speed.
With the previously noted bevel gear pairs, the new ratios expressed in power take−off per rear wheel revolution, are
listed below:
With all tires except for 380/70 R 20
revs 11.55 PTO 540 RPM
revs 16.23 PTO 1000 RPM
With tire 380/70 R 20
revs 8,09
PTO 540 RPM
revs 12,73 PTO 1000 RPM
NOTE: If the tires are changed, make sure that the new equipment bears the “ A8 ” code on the side. Always observe
the inflation pressures as specified on tables.
3-37