New Holland T4.105F, Руководство оператора

Страница: 125 / 248

6 - WORKING OPERATIONS
Hydraulic lift with electronic control
WARNING
Crushing hazard!
The lifting systems must be operated by qualified personnel who are aware of the correct procedures
to follow. Make sure all lifting equipment is in good condition, and all hooks are equipped with safety
latches.
Failure to comply could result in death or serious injury.
W0256A
The functions of the front lift are controlled by the same ECU as the rear lift.
For reasons of safety, the front lift controls are disabled when the tractor is started.
The disabled status is signalled by the indicator light on the instrument cluster coming on.
Enabling controls
To enable the controls, proceed as follows:
• With the engine running, check that the alternator
charging light is OFF;
• Set the switch
(1) first to the raising position (B) and
then to the lowering position (A) ;
• Turn the work position potentiometer
(2) clockwise,
then anticlockwise until the indicator goes out.
NOTE: Should a fault occur on the lift after malfunction-
ing of the sensors/actuators, the control unit will send a
signal to the indicator . The type of flash enables
identifying the fault code and the corresponding problem.
MOIL13TR00953AA
1
MOIL13TR00954AA
2
6-27