New Holland T4.105F, Руководство оператора

Страница: 69 / 248

3 - CONTROLS/INSTRUMENTS
Changing clock hours/minutes
If you want to change the hour, proceed as follows.
Turn the ignition key onto the first click, holding down the
symbol
(B) on the switch for more than three seconds.
• The central display shows
"SETUP MENU" as in detail
(1) . Release the symbol (B) to go to detail (2) "CAL" .
• Press the symbol
(B) on the switch to go to the display
“SET” as in detail (3) .
• Press the symbol
(B) on the switch again and you dis-
play the hour set at that time with the first digit of the
hours
“h” blinking. Clock setting can now begin.
• Use the arrow
(C) on the switch to change the value
that increases by one unit each time it is pressed.
NOTE: If you hold down the switch continuously with-
out releasing it, the digit will move forward continuously
to 12 and recommence from 0, if the setting has been
made in the 12 hour mode, or up to 24 to recommence
from 0 if vice versa it has been made in the 24 hour
mode.
• To save the setting, press the switch on the symbol
(B) .
• Use the arrow
(D) to move to the right. If you want to
change, repeat the instructions just described or press
the arrow down again, to move to the right. Repeat the
same steps until the last digit of minutes
“m” . See the
example in detail (5) .
• To save, press the switch on the symbol
(B) .
NOTE: If you want to stop the display, press the symbol
(A) on the switch. This will automatically take you back to
the display as in detail (4) . Press the same symbol again
to exit the programming menu.
MOIL13TR00555CA
2
3-31