New Holland T4.105F, Руководство оператора

Страница: 174 / 248

7 - MAINTENANCE
Fuel filter water drain
NOTICE: Before loosening or disconnecting any part of the fuel injection system, thoroughly clean the area to be
worked on to prevent contamination.
When the instrument cluster display shows the water
in fuel symbol , drain the fuel filter (with sedi-
menter) immediately as follows:
1. Place a container under the filter (1) ;
2. Remove the retaining pin (2) and disconnect the
sensor (3) ;
3. Remove the drain plug (4) at the base of the filter;
4. Allow contaminated fuel to drain until only clean fuel
runs out. Drain off the fuel and dispose of it appro-
priately. Close the drain plug and replace the sen-
sor wire in position.
5. Start the engine running, after a few seconds the
indicator light must go out. If the indicator stays on,
replace the filter even if it has not yet reached the
time for it to be changed.
• Figure
1 , models T4.75F and T4.85F
• Figure
2 , models T4.95F and T4.105F
MOIL13TR00639AA
1
MOIL13TR00640AA
2
7-20