NEW BRUNSWICK SCIENTIFIC Scale Interface Box, Руководство по эксплуатации

Страница: 37 / 62

37
New Brunswick Scientific Co., Inc. User’s Guide
Figure 6: Device Setup Screen
9. Select the Instrument Type and the Operation Mode, then Click on OK .
10. Once the Input Device has been configured, press
OK
to accept the control loop
configuration. You will be prompted to accept the changes to the loop configuration.
11. The
SYSTEM CONFIGURATION PASSWORD
prompt will appear. Enter the password
and clock
OK
. If the
SYSTEM CONFIGURATION PASSWORD
is set to blanks, the
prompt will not appear.
12. To exit the
CONFIGURATION SCREEN
, click on the
CLOSE
button. Any changes made
to the loop configuration will be seen on the corresponding display gauge in the
MAIN
DISPLAY SCREEN
.
Not applicable
for this
Controller