NEW BRUNSWICK SCIENTIFIC Innova CO-170, Руководство по эксплуатации

Страница: 16 / 56

16
M1305-0050 Innova CO-170 CO
2
Incubator User’s Guide
Table 1: Accessories Provided
Quantity Item Notes
3 Non-tip Shelves Packed Separately
2 Wire Shelf Racks Packed Separately
18 Silicone Rubber Suction Feet Packed in Humidity Tray
1 Humidity Tray Packed Separately
1 White porous CO
2
Sensor Cover Installed
1 Black Sensor Cover* Installed
1 Power Cord Packed in Humidity Tray
3 meters,
9.8 feet
PVC Tubing, ~1/4-inch or 6mm
bore, with an inline CO
2
HEPA-filter
connected, ready for use
Packed in Humidity Tray
2 Hose Clips Packed in Humidity Tray
1 Autozero HEPA Filter Packed in Humidity Tray
4 Adjustable Feet Packed in Humidity Tray
4 Anti-slip Pads for adjustable feet Packed in Humidity Tray
1 User Manual Provided
* There is a holder at the front of the unit (inside the door) to store the black sensor cover.
2.3 Utilities
In order to use the incubator, you will need:
Table 2: Utilities
Utility Requirement
100/120V, 50/60 Hz grounded electrical supply with minimum capacity of 6
amps (or 8 amps for High Temperature Decontamination Models)
OR
Electricity
220/240V, 50 Hz grounded electrical supply with minimum capacity of 3
amps (or 5 amps for High Temperature Decontamination Models)
CO
2
Gas Cylinder with 100% CO
2
vapor withdrawal, together with a two-stage
regulator for pressure control to 5 psi or 0.35 BAR
2.4 Location
The incubator is designed to operate at a chamber temperature of 1.0°C above
ambient, and at an absolute minimum ambient temperature of 15°C if the unit is
being used at 37°C.
Care should be taken to avoid placing the incubator in a position that may affect its
performance, such as those listed below.