NEW BRUNSWICK SCIENTIFIC Innova CO-170, Руководство по эксплуатации

Страница: 51 / 56

51
New Brunswick Scientific User’s Guide
Table 4a: Decon Failure Codes & Descriptions
Failure Code Failure Code Description
(see Table 4b below)
01 Z
02 W
03 W, Z
04 X
05 X, Z
06 W, X
07 W, X, Z
08 Y
09 Y, Z
0A W, Y
0B W, Y, Z
0C X, Y
0D X, Y, Z
0E W, X, Y
0F W, X, Y, Z
Table 4b: Decon Failure Code Explanations
Failure Code
Description
Explanation
W Temperature drop during warm-up period: indicates
the temperature fell more than 2
°
C during the
heating phase over a 60-second period.
X Temperature drop during 4-hour period: i
ndicates
the temperature fell below 118.0°C during the
decontamination phase
.
Y Temperature increase during cool-down phase:
i
ndicates the temperature rose by more than
2
°
C
during the cooling phase over a 60-second period
.
Z Cancel key pressed.
NOTE:
If the incubator power is cycled
OFF
then
ON
during a decontamination
cycle due to a power outage, the incubator will power up as normal.
This condition will be indicated by the absence of a completed
decontamination status message (
DECONTAMINATION COMPLETED OK
).
If the chamber temperature is above the setpoint or the element
temperature is greater than a factory-preset control point, cool-down
will be entered until these conditions are satisfied.