Neuro-ERG/V (Technical Manual)
14
On the rear panel of the auditory-visual stimulator unit there are the connector for
USB cable (for connection to PC), connector for reversal pattern monitor (not for vet-
erinary use) and trigger output socket (Fig. 5).
Fig. 5. The rear panel of the auditory-visual stimulator unit.
The USB hub KM-7-2 can also be included in the delivery set of the system. The in-
formation about the functions of the connectors and indicators of USB hub and also its
operation is described in the corresponding technical manual.
1.4. Synchronization with Stimulators of Third-party
Manufacturers
The trigger input socket is used for synchronization of the amplifier with other devices.
It is located on the top side panel of the amplifier. The numbering of the socket pins is
shown in Fig. 6 and the functions of these pins are described in Table 2.
The devices attached to the trigger socket must have the protection class
against
the electrical shock according to IEC 60601-1:2012 (AAMI/ANSI ES 60601-
1:2005/(R2012) and A1:2012 and A2:2010/(R)2012, EN 60601-1:2006/A1:2013).
Fig. 6. Numbering of socket pins (view from the case outside).
