16
10 TROUBLE SHOOTHING
Mist Makers
If no mist is being produced in the mist tube, check the fuse first.
• You can swap out a mist maker from working and non
-working sections on to determine if a fuse is
blown or if the mist maker is no longer good.
If mist is present in the mist tube, but volume is diminished, it can be caused by:
• Front
fan malfunction creating less mist.
• Rear fan malfunction not moving mist upwards from the mist chamber
.
• High water level in the mist tube will squash mist production
. This is usually a sign of a float sensor
malfunction or unlevel unit. It is an indication there may be a bigger issue at hand. In most cases , this
can be resolved by back flushing the mist chamber. You may need to repeat this process several times.
Light Strip
•
Loose connection on board socket or on a rare occasion, a poor solder joint.
•
Driver Card has failed
Excess condensation on the top of the unit or on lights, can be caused by:
•
Strong air currents in a room (door, window, AC vents, etc.)
•
If you adjusted the fan filters to increase mist productrion, re-adjust the filter to reduce the quantity
of mist produced to limit condensation.
•
Too much decorative media that obstructs the flame vent.
Electromagnetic Valves
•
A defective valve can allow water to leak into bottom tank and will not be shut off by float sensors.
This can cause a leak through the front fan.
11 WARRANTY
Devices have a limited warranty of two years (from date of purchase).
This limited warranty applies only to the original purchaser of the product and is non-transferable.
The warranty does not cover the mist maker and LED light strips which will require replacement
periodically depending on the amount of use.
The warranty does not apply to products that have been repaired unless they were repaired by the
manufacturer or an authorized representative.
The warranty does not apply to wear parts such as the
ultrasonic Mist Maker and LED light strips.
The warranty does not apply to defects resulting from improper use,
poor cleanliness of the water
used
, abuse, accidents, negligence, improper installation, improper maintenance, or handling.
For the warranty, defects must be reported to the manufacturer’s technical service or its representative.
Please provide proof of purchase (receipt) and serial number. The warranty is limited to the device only.
NetZero is a distributor of these products, which are designed and manufactured by aFire World Ltd.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF AND
SUPPLIED MANUALS. IMPLIED WARRANTIES OF MERCHANTABILITY, IMPLIED WARRANTIES OF FITNESS,
IMPLIED WARRANTIES OF WORKMANSHIP AND OTHER IMPLIED WARRANTIES ARE EXCLUDED BY NETZERO.
