2.
1.
2.
If your equipment rack provides dual power circuits and your unit is equipped with a dual power supply, make sure to plug
each power supply into a separate power circuit.
DO NOT INSTALL ETHERNET OR TELECOM CABLES. You must complete the Initial Configuration
before connecting the UX system to
your network.
Installing the Cable Management Bracket
In order to provide cable strain relief for cables connected to UX interface cards, a cable management bracket is provided.
To Install the Cable Management Bracket
Place the cable management bracket on top of the pan handle plates.
If you have installed the UX chassis in a 2-post configuration, you must install the pan handle plates on the rear corners of the
chassis.
Use the provided cable ties to secure the the cable management bracket to the pan handle plates.
Refer to the illustration below for visual details of the installation (click to enlarge).
DO NOT INSTALL ETHERNET OR TELECOM CABLES. You must complete the Initial Configuration
before connecting the UX system to
your network.
Next Steps
You are now ready to complete the initial configuration of the UX system.
Proceed to Initial Configuration of UX.
UX2000 Chassis Installation Requirements
