1.
2.
1.
2.
Ground Connections on Left Rear Panel of the UX1000
To Ground the UX2000 System
Locate the ground connection bolt at the back left corner of the chassis.
For UX2000, attach 14 AWG copper wire and a 1-hole UL approved lug to the grounding bolt. Use Panduit PN14-6R or equivalent.
To Ground the UX1000 System
Locate the ground connection bolt at the back left corner of the chassis.
For UX1000, attach 14 AWG copper wire and a 1-hole UL approved lug to the grounding bolt. Use Panduit PN14-6R or equivalent.
UX1000 Hardware Specifications
View Source
This section describes the dimensional, environmental, power, and network specifications and requirements for the UX2000 System.
Dimensions and Weight
Environmental Ranges (Operation and Storage)
Power Supply
Networking Interfaces
Dimensions and Weight
Equipment
Height mm/in.
Width mm/in.
Depth mm/in.
Weight lb./kg
Chassis with no interface cards or expansion modules
42.00 / 1.65
441.60 / 17.38
299.00 / 11.77
8.50 / 3.85
Maximum supported configuration
Environmental Ranges (Operation and Storage)
Environmental Parameter
Specification
Operating Environmental Conditions
Storage Environmental Condition
Cooling System
Power Supply
The UX system comes equipped with a single power supply which complies with the following specifications:
Item
Specification
