10
6. Set up Instruction
--- On/Off ---
Power on
Insert batteries.
Turn on
Press function key till green indicator flashes once.
Turn off (Restore to factory setting)
Press the function key for more than 8 seconds, and the green indicator light
will flash continuously. Release the key after the flash starts, and the device
will automatically shut down after the flash ends.
(Indicator light display: the indicator light will flash once every 2s to prompt
the current pressing duration)
Power off
Remove Batteries.
Note:
Please put the battery into the battery holder according to the positive and negative electrodes of the
battery, and push back the back cover.
Two CR2450 button batteries are required to supply power at the same time.
3. Remove and insert the battery; the device memorizes previous on/off state by default.
4. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor inductance and other
energy storage components.
5. Press function key and insert batteries at the same time; it will enter engineer testing mode.
--- Network Joining ---
Never joined the network
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
(when the device is on)
Suggest to check the device verification information on the gateway with
your platform server provider.
