C
E
F
G
H
I
J
K
L
A
B
D
A
B
Provides overall basic control limited to switching & routing video inputs and outputs. Can be used in conjunction
with basic IR remote which is included.
Both analog and digital audio only inputs. Audio only inputs can be routed according to zone output or embedded
onto HDMI content. Control of Audio routing can be achieved through the Netvio GO iOS, iPadOS and Android.
application or via the published API available online at www.netvio.co.uk
C
Used to send IR signals to a specific display area. Useful applications include sending IR signals from a 3rd party control
system to a display area. For this application it is important to use the provided 3.5mm to 3.5mm jack cable between
matrix and control system IR output ports. Netvio does not support the use of 3rd third party IR accessories.
D
Allows a single cable connection to send an IR signal to all displays simultaneously. For this application it is
important to use the provided 3.5mm to 3.5mm jack cable between matrix and control system IR output ports.
Netvio does not support the use of 3rd third party IR accessories.
E
Used to send IR signals received from the display location, then repeated to a media source via a supplied IR
emitter cable. Netvio does not support the use of 3rd third party IR accessories.
F
G
Point-to-point bi-directional communication from 3rd party control system to a single display location. Ensure TX to
RX & RX to TX wiring (including ground connections), Always use the provided green 3-pole connectors for matrix
side. At the display area, RS-232 connections are made available on all Netvio HDBaseT receivers.
H
Zone dedicated analog and digital outputs. S/PDIF supporting multi-channel. 3.5mm jack socket supporting L/R
stereo audio. Both outputs can operate simultaneously. Outputs can receive audio signals as a part of audio matrix
function and controlled through API or Netvio GO applications for iOS, iPadOS and Android.
I
USB charging function only. Provision for future product upgrade.
J
RJ-45 network connection for IP control. DHCP (auto assigned without DHCP). Required connection for use with
Netvio 360 configuration utility. RS-232 serial communication via 9W D connection. RS-232 interface cable
provided.
K
Ground screw for 3mm tag.
Universal mains power connection. IEC power cable provided.
Global IR Input Port
Audio Only Device Inputs
IR Input Ports
Global IR Input Port
IR Output Ports
Global IR Output Port
Direct Zone RS-232
Audio Outputs
USB Charging Ports
Communication Ports
Ground Connection
Power Connection
L
Rear Panel
Allows a single cable connection to send an IR signal to all media sources simultaneously. For this application it is
important to use the provided 3.5mm to 3.5mm jack cable between matrix and control system IR output ports.
Netvio does not support the use of 3rd third party IR accessories.
Drivers available at www.netvio.co.uk
8
