Premium 8x8 Matrix using Gen. 2 HDBaseT transmission technology
delivering 4K/60 4:4:4 HDR capability over a dedicated single cable
infrastructure or full 18Gbps pure HDMI outputs. The HT2-0808 includes a host
of free-on-board features including onboard scaling, audio distribution &
routing, ARC capture, both 40m & 70m output capabilities as well as
compatibility with Netvio's 360 embedded configuration utility and Netvio GO
end-user full spectrum AV control applications.
Quick Start Guide
Thank you for purchasing this Netvio product. The quick-start-guide is
designed to provide all required information to install your product
successfully, ensuring correct installation standards, therefore guaranteeing
performance in accordance with published features and specifications. Netvio
therefore greatly appreciates your time in reviewing the provided information
and following our recommended guidelines.
MX-HT2-0808-10
Before starting the installation, we recommend that you
download the Netvio 360 utility software from
www.netvio.co.uk. This provides easy configuration of the HT2
matrix. In addition, 360 provides the gateway to the Netvio GO
AV control application for Apple and Android devices. You will
require the product serial & product part number as a part of
the software validation process.
Safety Information
Attempts to remove product casings could result in electrical shock. Please do not attempt
to repair the device. In the event of product service requirements, please contact Netvio Ltd
or an authorised reseller for service procedures. Any unauthorised attempt to repair the
product or attempts to replace components with non-approved parts will invalidate the
product warranty. For full warranty conditions, please visit www.netvio.co.uk
Important Installation Guidelines
Prior to configuration, please ensure the matrix is properly seated on a flat, secure surface or housed in a suitable rack
mount with ample space for airflow and heat dissipation. Avoid direct contact with sources of heat such as heating systems
or audio amplifiers. Operating environment should not exceed stipulations of 0°C / +40°C | 20% - 90% RH
A suitable wired or wireless network with a router supporting DHCP (Dynamic Host Configuration Protocol ) is required
where both Matrix and computer are connected to the same network.
If a suitable router or DHCP server is not available, a direct network connection between computer and Matrix is supported,
with both computer and Matrix set to auto assign IP addresses, where Netvio360 will discover the device and guide you
through the set-up.
Drivers available at www.netvio.co.uk
In the box
1no. Netvio matrix device.
1set Regionalised IEC power lead.
1 Pair of 19" mounting brackets
8no. IR emitters
8no. IR receivers
8no. IR to IR cables
8no. 3-Pin serial connectors
1no. RS-232 connection cable
1no. master remote
3-year standards parts & labour
warranty.
Additional 2-years subject to online
registration within 90-days of
installation.
Safeguard 10-Year | 10% option
available.
Full warranty terms & conditions &
online registration available at
www.netvio.co.uk
Warranty
2
