Netscout OptiView XG, Руководство по началу работы

Страница: 60 / 77

54
Windows Restore Options

Caution
The OptiView XG could be rendered inoperable if the System Recovery process is interrupted. The
AC adapter (not batteries) should be used to power the OptiView XG during the recovery process.
Windows 7 Back Up and Recovery Procedure
NOTE
The following describes Windows 7 procedures. If you have Windows 10 installed on your OptiView XG,
skip to page 55 .
Back Up Your Files
If you want to keep any files that currently exist on the OptiView XG’s hard drive, use Windows Backup to save
them to an external drive. You will need to deselect the “postgres” user account from the backup.
1. Select the Windows button, then select Control Panel .

Set the view control to View by: Small icons .
2. Select Backup and Restore .


Note that if you have previously set up a backup, the “Set up backup” button will not appear on this
screen. In that case you will need to choose Control Panel>Recovery>Advanced recovery
methods>Reinstall Windows>Back up now and then proceed to step 5.
3. Select Set up backup .
4. Choose an external destination drive for the backup.
5. At the screen that says “What do you want to back up?” select Let me choose and select Next .
6. At the “What do you want to back up?” screen deselect postgres’s Libraries and deselect Include a system
image... .
7. At the “Review your backup settings” screen ensure that OptiView’s Libraries are included and postgres’s
Libraries are not included.
8. Select Save settings and run backup .
9. When the backup completes, disconnect the external drive from the OptiView XG.
Recover Windows System Files
1. Disconnect all cables from the OptiView XG except the AC adapter, the keyboard, and the mouse.
2. Restart the OptiView XG.
3. When the NETSCOUT splash screen appears, press the F8 key multiple times.
4. The Advanced Boot Options screen will appear. Verify that Repair Your Computer is selected, then press
Enter .