Netscout OptiView XG, Руководство по началу работы

Страница: 69 / 77

63
OptiView XG Network Analysis Tablet
Getting Started Guide
Exposure to RF Energy
THIS MODEL DEVICE MEETS U.S. AND INTERNATIONAL REQUIREMENTS FOR EXPOSURE TO RADIO
FREQUENCY RADIATION.
The OptiView XG is a radio transmitter and receiver. It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission
of the U.S. Government and by the International Commission on Non-Ionizing Radiation Protection (ICNIRP).
The device also meets the European Radio and Telecommunications Terminal Equipment (R&TTE) directive,
for protecting the health and safety of the user and other persons.
These limits are part of comprehensive guidelines that establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons, regardless of age and health.
Before a device model is available for sale to the public, it must be tested and certified to operate within the
limits for safe exposure established by the FCC and international organizations. The tests are performed in
positions and locations (e.g., next to the body) as required by the FCC for each model. The FCC has granted an
Equipment Authorization for this model device with all reported SAR levels (see below) evaluated as in
compliance with the FCC RF emission guidelines.
This device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the
body. In order to transmit data or messages, this device requires a quality connection to the network. In some
cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure
that the recommended distance is observed until the transmission is complete.
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption
Rate, or SAR. Tests for SAR are conducted using standard operating positions specified by the FCC with the
device transmitting at its highest certified power level in all tested frequency bands. The SAR limit set by the
FCC is 1.6 W/kg. The international guidelines state that the SAR limit for mobile devices used by the public is
2.0 W/kg averaged over 10 grams of body tissue. SAR values may vary depending on national reporting
requirements and the network band. Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum value because the device
operates at multiple power levels and uses only the power required to reach the network.
SAR information on this model device is on file with the FCC and can be found under the Display Grant section
http://www.fcc.gov/oet/fccid after searching on FCC ID: WA7-43460AC.
Europe-EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. This device is a
2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA
countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
authorization to use the device for setting up outdoor radio links and/or for supplying public access to
telecommunications and/or network services.