Netscout OptiView XG, Руководство по началу работы

Страница: 43 / 77

37
OptiView XG Network Analysis Tablet
Getting Started Guide
Operating the OptiView XG on Battery Power
Battery Operation
The OptiView XG Network Analysis Tablet has two lithium-ion batteries. The batteries are installed into the
back of the OptiView XG.
The OptiView XG will run approximately 2 hours using fully-charged batteries. You can hot-swap spare
batteries (one at a time if the AC adapter is not connected) to extend run-time.
NOTE
The batteries will last approximately 4 hours with the Wireline Ports turned Off and the wireless adapters
turned On. See
“Enabling the Wi-Fi Adapters” on page 27
.
Charging the Batteries
Before running the OptiView XG Network Analysis Tablet on batteries, connect the AC adapter to the OptiView
XG and charge the batteries. Charge time is approximately 3 hours.
Power/Charge Indicator
The LED next to the OptiView XG power button indicates the power on/off state and the battery charge status.
Table 7. Power/Charge Indicator
LED Color LED State Description
Green On The OptiView XG is powered-on. Use the battery status window to
determine battery charge state. See instructions on page 38 .
Yellow Flashing The OptiView XG is in sleep mode or powered-off.

The AC adapter is connected, and the batteries are charging.
Yellow On The OptiView XG is in sleep mode or powered-off.

If the AC adapter is connected, the batteries are fully charged.
Off Off The OptiView XG is powered-off (shutdown, not in sleep state) and the
AC adapter is disconnected.