NetPing server room environmental monitoring solutions and IP power distribution units.
Copyright © NetPing east Co., Ltd / E-mail:
/ Phone: +886-2-23121582
[email protected] www.netpingdevice.com
1.
2.
3.
[ENG] 7.4. [DKSF 48.5 IU] How to Control an Input-Output Line in an "Output"
To control an IO-line, there is a need to go to the page «
» of the device web interface:
DISCRETE IO
Set the operation of an IO-line to the «
» mode;
Output
Check the checkbox «
» to «
» or «
»;
Output Logic Level
Logic 0
Logic 1
Save the parameters by clicking the button «
».
Apply changes
IO Mode
— is a parameter which allows you to set the IO line in the "Input", "Output" modes. In Default: Input.
Output Logic Level
—
is a parameter of a logic level on the line that operates as «
». A logic « » means having voltage at the input line
Output
1
(open collector circuit). A status of a logic « » means having no voltage at the IO line.
0
I
: logic «0».
n default
Single Pulse Generation
—
when clicking the button «
», an IO-line that works as an «
», will be inverted for a specified period of time.
Pulse
Output
Pulse duration is set in the entry field «
». If a line is configured as «
», a button for issuing a pulse
Pulse Duration(100-25 500ms, step 100ms)
Input
is inactive.
