Easy Setup 6-5
2. Easy Setup Profile
The Easy Setup Profile screen is where you configure the parameters that control the Netopia 3366-ENT’s
connection to a specific remote destination, usually your ISP or a corporate site. On a Netopia 3366-ENT you
can add up to 15 more connection profiles, for a total of 16, although you can only use one at a time, unless
you are using Vir tual Private Networks (VPNs).
1.
To enable address translation, toggle
Address Translation Enabled
to
Yes
(the default). You need not
change this unless you have a specific reason. For more information on Network Address Translation, see
the
Firmware User’s Guide
chapter on “Multiple Network Address Translation (MultiNAT)“.
2.
Depending on your Data Link Encapsulation selections, either
Numbered
or
Unnumbered
IP Addressing
may be enabled by default. (You may choose either from the pop-up menu, if specifically instructed to do
so.) Unless other wise specified by your ser vice provider, accept the defaults, and do not change the next
two values. They will be supplied by your ISP.
3.
Press the Down arrow key until you reach
NEXT SCREEN
. Press Return to bring up the next screen.
Connection Profile 1: Easy Setup Profile
+--------------+
Underlying Encapsulation... +--------------+
RFC1483 Mode... | Bridged 1483 |
| Routed 1483 |
+--------------+
Address Translation Enabled: Yes
IP Addressing... Numbered
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
PREVIOUS SCREEN NEXT SCREEN
Connection Profile 1: Easy Setup Profile
Underlying Encapsulation... None
PPP Mode... VC Multiplexed
PPP Authentication... None
Address Translation Enabled: Yes
IP Addressing... Numbered
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Remote IP Address: 127.0.0.2
Remote IP Mask: 255.255.255.255
PREVIOUS SCREEN NEXT SCREEN
Enter basic information about your WAN connection with this screen.
If you selected RFC1483 in the previous screen, the
Easy Setup Profile screen allows you to choose
PPPoE
or
None
as the
Underlying Encapsulation
.
•
If you choose
None
, the
RFC1483 Mode
offers
the choice of
Bridged 1483
or
Routed 1483
.
•
If you choose
PPPoE
, a
PPP Authentication
option appears, to permit you to select
PAP
or
CHAP
authentication (or
None
), and fields to
enter PAP
User Name
and
Password
, or CHAP
Host Name
and
Secret
.
If you selected PPP in the previous screen, the Easy
Setup Profile screen allows you to choose
PPPoE
or
None
as the
Underlying Encapsulation
.
•
If you choose
None
, the
PPP Mode
offers the
choice of
VC Multiplexed
or
LLC SNAP
.
•
The
PPP Authentication
option permits you to
select
PAP
or
CHAP
authentication (or
None
),
and fields to enter PAP
User Name
and
Password
, or CHAP
Host Name
and
Secret
.
Содержание 3366-ENT
Страница 1: ...Netopia 3366 ENT ADSL Router with V 92 Backup Getting Started Guide...
Страница 12: ...2 6 Getting Started Guide...
Страница 16: ...3 4 Getting Started Guide...
Страница 24: ...5 4 Getting Started Guide...
