Netopia 3366-ENT, Руководство по началу работы, Страница: 28 / 54

6-4 Getting Started Guide
1. ADSL Line Configuration
1. Select Trellis Coding Enabled . Toggle it to On (the default) or Off. Unless other wise specified by your
provider, you can accept this default.
2. Select Fast Retrain Enabled . Toggle it to On (the default) or Off. Unless other wise specified by your
provider, you can accept this default.
3. The Wiring Type pop-up menu allows you to choose the type of copper pair wiring in use at your location.
The Router is preset to AutoSense , so that it will tr y both common types automatically, without any
adapters required. You can choose your own type, if you know it. Tip/Ring (Inner Pair) is the most common
type. If you know that you have the reversed inner/outer pair type of wiring, choose A/A1 (Outer Pair) from
the pop-up menu.
4. Select Data Link Encapsulation and from the pop-up menu choose either RFC1483 (the default) or PPP .
5. The next two fields, Data Circuit VPI and Data Circuit VCI are editable. Enter the Vir tual Path Identifier and
Vir tual Channel Identifier values that your provider specifies. VPI 8/VCI 35 are the most common. Your
provider must specify these values.
6. Press the Down arrow key until you reach NEXT SCREEN . Press Return to bring up the next screen.
ADSL Line Configuration
Trellis Coding Enabled: On
Fast Retrain Enabled: On
Wiring Type... AutoSense
Data Link Encapsulation... RFC1483
Data Circuit VPI (0-255): 8
Data Circuit VCI (32-65535): 35
PREVIOUS SCREEN NEXT SCREEN
Return/Enter brings you to next screen.