Netopia 3300-ENT Series, Руководство пользователя для прошивки

Страница: 193 / 334

IP Setup 7-1
Chapter 7
IP Setup
Netopia Firmware Version 8.7 uses Internet Protocol (IP) to communicate both locally and with remote
networks. This chapter shows you how to configure the gateway to route IP traffic. You also learn how to
configure the gateway to ser ve IP addresses to hosts on your local network.
Netopia’s IP routing features Network Address Translation and IP address ser ving.
This section covers the following topics:
•
“IP Setup” on page 7-2
•
“RIP Options” on page 7-10
•
“IP Address Ser ving” on page 7-17
•
“More Address Ser ving Options” on page 7-23
•
“DHCP Relay Agent” on page 7-28
•
“Connection Profiles” on page 7-30
• “Multicast For warding” on page 7-33
Network Address Translation allows communication between the LAN connected to the Router and the Internet
using a single (or a few) IP address(es) instead of a routed account with separate IP addresses for each
computer on the network.
Network Address Translation also provides increased security by hiding the local IP addresses of the LAN
connected to the Netopia gateways from the outside world.
The setup is simpler, so ISPs typically offer Internet accounts suppor ting Network Address Translation at a
significant cost savings.
For a detailed discussion of Network Address Translation, see Chapter 4, “Multiple Network Address
Translation.”