manualshive.com logo in svg

Netopia 3300-ENT Series, Руководство пользователя для прошивки

Netopia 3300-ENT Series - это надежное устройство для бизнеса, предлагающее высокую производительность и надежность. Скачайте бесплатное руководство пользователя и прошивку с manualshive.com, чтобы узнать больше о функциональности этого продукта. Надежный и удобный в использовании - идеальный выбор для вашего бизнеса.

Поделиться
Скачать
background image

System Configuration   3-43

You will need to install a Syslog client daemon program on your PC and configure it to repor t the WAN events 
you specified in the Logging Configuration screen.

The following screen shows a sample syslog dump of WAN events:

Log event dispositions

Note:

Syslog must be enabled to comply with Logging requirements mentioned in The Modular Firewall 

Cer tification Criteria - Baseline Module - version 4.1 (specified by ICSA Labs).
For more information, please go to the following URL:

http://www.icsalabs.com/icsa/docs/html/communities/firewalls/pdf/4.1/baseline.pdf

Message format

Protocol:<TCP/UDP> srcIP: <value> dstIP: <value> srcPort: <value> dstPort<value> <reason-string>
Protocol:<ICMP> srcIP: <value> dstIP: <value> type:<value> code:<value> <reason-sting>
Protocol:<value> srcIP: <value> dstIP: <value> <reason-sting>

The following syslog messages may be generated by the Router based on system-events:

1.

permitted

May  5 10:14:06 tsnext.netopia.com   Link 1 down: PPP PAP failure
May  5 10:14:06 tsnext.netopia.com >>Issued Speech Setup Request from our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Requested Disc. from DN: 917143652500
May  5 10:14:06 tsnext.netopia.com   Received Clear Confirm for our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Link 1 down: Manual disconnect
May  5 10:14:06 tsnext.netopia.com >>Issued Speech Setup Request from our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Requested Disc. from DN: 917143652500
May  5 10:14:06 tsnext.netopia.com   Received Clear Confirm for our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Link 1 down: No answer
May  5 10:14:06 tsnext.netopia.com --Device restarted-----------------------------------------
May  5 10:14:06 tsnext.netopia.com >>Received Speech Setup Ind. from DN: (not supplied)
May  5 10:14:06 tsnext.netopia.com   Requested Connect to our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   ASYNC: Modem carrier detected (more) Modem 
                                     reports: 26400 V34 
May  5 10:14:06 tsnext.netopia.com >>WAN: 56K Modem 1 activated at 115 Kbps
May  5 10:14:06 tsnext.netopia.com   Connect Confirmed to our DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   PPP: Channel 1 up, Answer Profile name: Default Profile
May  5 10:14:06 tsnext.netopia.com   PPP: NCP up, session 1, Channel 1 Final (fallback) 
                                     negotiated auth: Local PAP , Remote NONE
May  5 10:14:06 tsnext.netopia.com   PPP: PAP  we accepted remote, Channel 1 Remote name: guest
May  5 10:14:06 tsnext.netopia.com   PPP: MP negotiated, session 1 Remote EDO: 06 03 0
                                     000C5700624 0
May  5 10:14:06 tsnext.netopia.com   PPP: CCP negotiated, session 1, type: Ascend
                                     LZS Local mode: 1, Remote mode: 1
May  5 10:14:06 tsnext.netopia.com   PPP: BACP negotiated, session 1 Local MN: FFFFFF
                                     FF, Remote MN: 00000001
May  5 10:14:06 tsnext.netopia.com   PPP: IPCP negotiated, session 1, rem: 
                                     192.168.10.100 local: 192.168.1.1
May  5 10:14:06 tsnext.netopia.com >>WAN: 56K Modem 1 deactivated
May  5 10:14:06 tsnext.netopia.com   Received Clear Ind. from DN: 5108645534, Cause: 0
May  5 10:14:06 tsnext.netopia.com   Issued Clear Response to DN: 5108645534
May  5 10:14:06 tsnext.netopia.com   Link 1 down: Remote clearing
May  5 10:14:06 tsnext.netopia.com   PPP: IPCP down, session 1
May  5 10:14:06 tsnext.netopia.com >>Received Speech Setup Ind. from DN: (not supplied)

Содержание 3300-ENT Series















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3300-ENT Series

Paradyne 4300 Installation Instructions Manual preview
4300
Бренд: Paradyne Страницы: 22
3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Бренд: 3Com Страницы: 4
Lantronix Device Server UDS 10 Hardware Manual preview
Device Server UDS 10
Бренд: Lantronix Страницы: 8
Profile LS901-E1 Instruction Manual preview
LS901-E1
Бренд: Profile Страницы: 6
Dahua DHI-NVR2104-P-4KS2 Quick Start Manual preview
DHI-NVR2104-P-4KS2
Бренд: Dahua Страницы: 23
Davey RainBank mkII Installation Instructions Manual preview
RainBank mkII
Бренд: Davey Страницы: 18
peplink balance ONE Manual preview
balance ONE
Бренд: peplink Страницы: 2
Accton Technology MR3202A User Manual preview
MR3202A
Бренд: Accton Technology Страницы: 78
Intel IXP45X Developer'S Manual preview
IXP45X
Бренд: Intel Страницы: 958
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Бренд: Supero Страницы: 118
Atlantis WebShare 141 WN Quick Start Manual preview
WebShare 141 WN
Бренд: Atlantis Страницы: 78
Wave wifi MBR Series Quick Start Manual preview
MBR Series
Бренд: Wave wifi Страницы: 3
NetComm Dynalink 3G8WV Setup Manual preview
Dynalink 3G8WV
Бренд: NetComm Страницы: 34
Black Box LGB2003A User Manual preview
LGB2003A
Бренд: Black Box Страницы: 62
Ubiquiti Amplifi AFi-LR Quick Start Manual preview
Amplifi AFi-LR
Бренд: Ubiquiti Страницы: 32
Western Digital Passport WDXML1000UE Product Specifications preview
Passport WDXML1000UE
Бренд: Western Digital Страницы: 2
Quamtum HotSpot HS2 User Manual preview
HotSpot HS2
Бренд: Quamtum Страницы: 42
TP-Link Archer C24 Quick Installation Manual preview
Archer C24
Бренд: TP-Link Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды