Netopia 3300-ENT Series, Руководство пользователя для прошивки

Страница: 190 / 334

6-24 Firmware User Guide
If the remote tunnel end point is a hostname (or “0.0.0.0”) 0.0.0.0 is displayed until a Security Association is
established. Previously the remote members network was displayed.
WAN Event History Error Reporting
The following events are logged and displayed in the WAN Event Histor y screen:
Event message: Meaning:
IKE: no ph1 preferences assigned An attempt was made to use an IPsec profile with no IKE
profile attached to it.
IKE: DNS lookup failure The DNS lookup of the remote tunnel end point has failed.
IKE: no matching ph1 profile An IKE phase 1 request was received and did not match
any of the profiles stored in the local Router.
IKE: no matching proposal An IKE phase 1 request was received and the proposal did
not match an allowed parameter, or else the remote
rejected the local Router’s proposal.
IKE: phase 1 auth failure The phase 1 remote authentication failed.
IKE: phase 1 resend timeout The attempt to resend the phase 1 remote authentication
timed out.
IKE: phase 1 complete The phase 1 negotiation completed successfully.
IKE: phase 2 hash failure The phase-2 hash failed because the data received is out
of date or has been tampered with.
VPN Quick View
Profile Name----------Type--Rx Pckts--Tx Pckts--Discard--Remote Address--
HA <-> FA1 (Jony Fon ATMP 99 99 173.166.82.8
HA <-> FA3 (Sleve M. ATMP 13 14 63.193.117.91
My IPsec Tunnel IPsec 23 12 0.0.0.0
Bangalore PPTP 45 35 1.1.1.1